Har du som kund frågor eller funderingar så svarar vi enklast på mail via info@grevensmcdelar.com. Vi svarar snarast!

Knappsatser Ducati Panigale

Specifikationer 2 vägs

Start / Kill 2 button handlebar race switches for Ducati 

This switch is a direct replacement for the standard Start / Kill switch assembly found on the majority of recent Ducati bikes (except 749/999 ) 

This aluminium assembly has been designed ultra-slim and encompasses a red latching switch for RUN/STOP and a black momentary switch for the starter motor. 

No modification of the bike wiring is necessary, this kit plugs directly into the 4 way connector of the standard loom. 

Specifikationer 3 vägs

 3 button right side switch 

Stop / Run 

Starter 

Flash – lap SET 

1299 / 1199R (2015 on) / Superleggera 

This switch is designed only for use with the on bikes where the user already has the left side 5 way switch set BD-SW-5B-05 

The aluminium assembly has been designed ultra-slim and encompasses these waterproof switches: 

RED latching (Push On , Push OFF) for stop and run

Blue momentary to replicate the left side flasher function for Lap 

SET 

Black momentary for engine starter 

No modification of the bike wiring is necessary, this kit plugs directly into the 4 way connector of the standard loom, and also the wiring of the left side 5 way switch 

BD-SW-5B-05 as seen here on the right 

Specifikationer 4 vägs

Ducati Panigale 4 button handlebar race switches 

This switch is intended to replace the standard left hand handlebar switches on Ducati Panigale track bikes which no longer require the light and turn signal controls, yet still require the use of the dash MODE / SET functions. 

The aluminium assembly has been ergonomically designed for easy use and encompasses 4 momentary switches as described below. 

No modification of the bike wiring is necessary, this kit plugs directly into the 8 way connector of the standard loom. 

Specifikationer 5 vägs

Five button handlebar race switches for 

Ducati 1299 

Ducati 1098-R (2015 onwards) 

Ducati Superleggera 

This switch is a direct replacement for the standard left hand switch assembly found on the Ducati bikes listed above. 

The set is specifically designed for track use where the turn signals and lights controls are not needed. 

No modification of the bike wiring is necessary as this plugs directly into the 8 way and 3 way wiring loom connectors. 

For customers who want to use the flasher (Lap time SET function) you will need the additional right side 3 way switch assembly BD-SW-3B-06 – Image to the right. 

NOTE – The right and left side switches link together via the 2 way connector with YELLOW band 

Knappsatser
2 149,00 kr
  • subtitles Produktbeskrivning

    Specifikationer 2 vägs

    Start / Kill 2 button handlebar race switches for Ducati 

    This switch is a direct replacement for the standard Start / Kill switch assembly found on the majority of recent Ducati bikes (except 749/999 ) 

    This aluminium assembly has been designed ultra-slim and encompasses a red latching switch for RUN/STOP and a black momentary switch for the starter motor. 

    No modification of the bike wiring is necessary, this kit plugs directly into the 4 way connector of the standard loom. 

    Specifikationer 3 vägs

     3 button right side switch 

    Stop / Run 

    Starter 

    Flash – lap SET 

    1299 / 1199R (2015 on) / Superleggera 

    This switch is designed only for use with the on bikes where the user already has the left side 5 way switch set BD-SW-5B-05 

    The aluminium assembly has been designed ultra-slim and encompasses these waterproof switches: 

    RED latching (Push On , Push OFF) for stop and run

    Blue momentary to replicate the left side flasher function for Lap 

    SET 

    Black momentary for engine starter 

    No modification of the bike wiring is necessary, this kit plugs directly into the 4 way connector of the standard loom, and also the wiring of the left side 5 way switch 

    BD-SW-5B-05 as seen here on the right 

    Specifikationer 4 vägs

    Ducati Panigale 4 button handlebar race switches 

    This switch is intended to replace the standard left hand handlebar switches on Ducati Panigale track bikes which no longer require the light and turn signal controls, yet still require the use of the dash MODE / SET functions. 

    The aluminium assembly has been ergonomically designed for easy use and encompasses 4 momentary switches as described below. 

    No modification of the bike wiring is necessary, this kit plugs directly into the 8 way connector of the standard loom. 

    Specifikationer 5 vägs

    Five button handlebar race switches for 

    Ducati 1299 

    Ducati 1098-R (2015 onwards) 

    Ducati Superleggera 

    This switch is a direct replacement for the standard left hand switch assembly found on the Ducati bikes listed above. 

    The set is specifically designed for track use where the turn signals and lights controls are not needed. 

    No modification of the bike wiring is necessary as this plugs directly into the 8 way and 3 way wiring loom connectors. 

    For customers who want to use the flasher (Lap time SET function) you will need the additional right side 3 way switch assembly BD-SW-3B-06 – Image to the right. 

    NOTE – The right and left side switches link together via the 2 way connector with YELLOW band